Book a Heat Geek Survey
Clean Heat Solutions Ltd

Central Heating Design

Precision central heating design for new builds, renovations and retrofits across Hampshire and West Sussex — room-by-room heat loss, radiator sizing and full system drawings tailored to heat pumps and conventional boilers.

Central Heating Design

Clean Heat Solutions delivers technical, regulation‑compliant central heating design that reduces running costs and avoids oversizing. We produce room‑by‑room heat loss calculations, radiator and pipe sizing, heat pump selection and comprehensive system drawings for new builds, retrofits and renovations. As MCS‑accredited, Gas Safe and BPEC qualified engineers based on Hayling Island, we factor in coastal exposure, construction type and renewable integration to maximise seasonal efficiency. Boiler Upgrade Scheme grant handling is included to reduce your upfront cost where applicable.

Central Heating Design

How It Works

01

Survey & Heat‑Loss Assessment

On‑site building fabric and room measurements, U‑value checks and orientation analysis to produce accurate, room‑by‑room heat loss figures for properties from Victorian terraces to coastal bungalows.

02

System Design & Specification

We size radiators/underfloor circuits, select heat pump or boiler equipment, design cylinder/primary circuits and produce full CAD-ready drawings and a written specification for installers or builders.

03

Installation Support & Commissioning

We liaise with your builder or installer, review installation queries, attend commissioning, verify flow temperatures and hand over a test and balance schedule with performance estimates.

Why Choose us for Central Heating Design?

MCS‑Accredited, BUS Grant Support

As an MCS installer we handle Boiler Upgrade Scheme paperwork and deduct the grant from your quote, reducing upfront cost and ensuring your heat pump design meets Ofgem standards.

Practical, Local Experience

Hayling Island engineers with hands‑on experience in Portsmouth, Southampton and Havant — we design for real building types (solid‑wall terraces, new builds, coastal homes) and the practicalities of installers on the ground.

Technical Certainty & Documentation

You receive room‑by‑room heat loss reports, radiator schedules, circuit and wiring diagrams, pump and control specs and commissioning checklists so projects run to programme and budget.

What we design: every central heating project starts with a detailed heat loss calculation to determine true demand. From there we size radiators or underfloor heating circuits, select the correct heat pump or boiler capacity, specify cylinders, controls and system hydraulics, and produce a full set of drawings and a parts schedule. Our designs consider real local issues — high wind exposure on Hayling Island, party‑wall heat transfer in Portsmouth terraces and low‑loss systems for timber‑frame new builds in West Sussex.

Deliverables you can use: a clear, installer‑friendly pack containing room‑by‑room kW loads, radiator schedules, pipework layouts, flow and return temperatures, pump duties and recommended controls. We also provide guidance on insulation improvements where small fabric upgrades reduce system size and running costs. Our Head Engineer, Aäron Bradbury, signs off every design; Clean Heat Solutions is Gas Safe, MCS, BPEC and NAPIT registered and covered by Trustmark and Zurich insurance.

Frequently Asked Questions

A heat loss calculation quantifies how much heat each room needs to maintain a comfortable temperature. It accounts for fabric, glazing, ventilation and orientation. Accurate calculations prevent oversizing (which wastes energy) and undersizing (which leaves rooms cold), ensuring your radiators, underfloor circuits and heat pump are the right capacity.

Yes. Our designs specify low flow temperatures and circuit lengths for underfloor heating and select heat pump capacity based on seasonal performance estimates. We match emitter type and control strategy to the heat source so heat pumps operate efficiently and maintain comfort in coastal and older properties.

Typical turnaround is 7–14 working days after the site survey, depending on project complexity. Small retrofit designs start from a competitively quoted fee, while larger new build packages are priced per project — we provide a written quotation after an initial site visit or remote briefing.

Yes. As an MCS‑accredited installer we complete the necessary BUS/Ofgem certification and can deduct the grant value from your quotation. We make the application process straightforward and ensure the selected heat pump and installation comply with scheme rules.

Possibly, but it depends on radiator size, type and the target flow temperature. We assess existing emitters during the survey and will recommend up‑sizing, additional radiators or switching to larger surface area emitters or underfloor heating where required to maintain comfort at lower heat‑pump flow temperatures.

Ready to start your heating design?

Book a site survey with Clean Heat Solutions and get a detailed heat loss report and a no‑nonsense design pack. Call 07391473964 or email info@cleanheatingsolutions.co.uk to arrange a visit.
Request a survey

Our Services

01

Underfloor Heating (UFH) Milling

Milled underfloor heating is a low-profile, low-disruption solution for retrofitting underfloor heating into existing homes. Clean Heat Solutions installs milled channel and between-joist systems across West Sussex and Hampshire.
Learn More
02

Air Source Heat Pump Install

MCS certified air source heat pumps designed around your home, fitted by Heat Geek Elite engineers, with the £7,500 grant taken off your quote.
Learn More
03

Central Heating Design

Precision central heating design for new builds, renovations and retrofits across Hampshire and West Sussex — room-by-room heat loss, radiator sizing and full system drawings tailored to heat pumps and conventional boilers.
Learn More
04

Air Con Service and Repairs

Annual air conditioning servicing to keep your system cooling efficiently, and repairs when it stops cooling, leaks or shows an error code.
Learn More
05

Air Source Heat Pump Service and Repair

Yearly servicing to keep your heat pump efficient and reliable, and repairs when it stops heating, ices over or shows an error code.
Learn More
06

MVHR (Mechanical Ventilation & Heat Recovery)

Full MVHR system design for homes across West Sussex & Hampshire — working in harmony with your heat pump and underfloor heating for a warmer, healthier home.
Learn More
07

Gas Boiler Installation

New combi, system and regular gas boilers, chosen for your home and fitted by Gas Safe registered engineers.
Learn More
08

Air Conditioning Install

Modern air conditioning keeps your home cool in summer, warm in winter, and comfortable year-round. Clean Heat Solutions supply and install air conditioning systems across West Sussex and Hampshire, including qualifying systems eligible for a £2,500 government grant.
Learn More